ABSTRACT
Nonwoven fibrous filter membranes are widely used in filtration because of their low cost. They are less effective in intercepting airborne particles of the order of 100 nm, which is of the SARS-CoV-2 (COVID-19) virus's size. Many diseases, including COVID-19, predominantly spread by droplets released by breathing, coughing, sneezing, or medical procedures. It was shown that the smallest droplets can evaporate in air before settling, thus, making viruses airborne and easily penetrating even the best masks and filters. As a result, air-filtering membranes, which are capable of effective interception of â¼100 nm nanoparticles are highly desirable. A traditional way to improve filtration efficiency by overlapping several layers of nonwoven fabrics increases the required pressure drop, and thus, should be avoided as much as possible. Here, we propose and demonstrate an innovative approach to enhance performance of filtration membranes based on (i) a dramatic reduction in the fiber size, and (ii) metal coating of the fibers. The first component of this approach allows one to incorporate a novel physical mechanism of filtration, the short-range van der Waals forces, whereas the second one adds the long-range electric Coulomb forces if the oncoming nanoparticles are pre-charged and the metal-plated membrane grounded. In the present work, the â¼100 nm aluminum nanoparticles are filtered as a model of commensurate airborne single COVID-19 viruses, and Platinum is used as the sputter-coated material for the fiber coating. The resulting filtration efficiency enhanced by the electric Coulomb forces alone is increased by the factor of 1.77, while the filtration efficiency additionally facilitated by the van der Waals forces increased by the factor of 2.44. In comparison to the filter membranes with â¼500 nm fibers without the electric forces involved, the van-der-Waals-electric filter membrane with fibers â¼90 nm is 2.24 × 1.77 = 3.96 times more effective. The quality factor of a membrane which combines the van der Waals and Coulomb forces is 10.6 psi-1, which is almost three times that of a comparable membrane without the electric Coulomb force (with only van der Waals forces being used).
ABSTRACT
The aerosol transmissibility of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has impacted the delivery of health care and essentially stopped the provision of medical and dental therapies. Dentistry uses rotary, ultrasonic, and laser-based instruments that produce water-based aerosols in the daily, routine treatment of patients. Abundant aerosols are generated, which reach health care workers and other patients. Viruses, including SARS-CoV-2 virus and related coronavirus disease (COVID-19) pandemic, continued expansion throughout the USA and the world. The virus is spread by both droplet (visible drops) and aerosol (practically invisible drops) transmission. The generation of aerosols in dentistry-an unavoidable part of most dental treatments-creates a high-risk situation. The US Centers for Disease Control and The Occupational Safety and Health Administration consider dental procedures to be of "highest risk" in the potential spreading of SARS-CoV-2 and other respiratory viruses. There are several ways to reduce or eliminate the virus: (i) cease or postpone dentistry (public and personal health risk), (ii) screen patients immediately prior to dental treatment (by appropriate testing, if any), (iii) block/remove the virus containing aerosol by engineering controls together with stringent personal protective equipment use. The present work takes a novel, fourth approach. By altering the physical response of water to the rotary or ultrasonic forces that are used in dentistry, the generation of aerosol particles and the distance any aerosol may spread beyond the point of generation can be markedly suppressed or completely eliminated in comparison to water for both the ultrasonic scaler and dental handpiece.